top of page
niagara-falls-PNYCT46.JPG

Cascata
Linen and garbage chutes

Cascata linen and waste chutes were developed to ensure maximum compliance with environmental hygiene regulations in hotels, healthcare facilities, and residential properties.

Their design is based on a modern, technological approach, defining a dedicated path that reduces space, simplifies linen management, and speeds up handling.

​

All Cascata chutes are individually designed and customized.

WHY CHOOSING CASCATA

Simple. 

​

Cascata suits every environment, takes up little space and transport the load directly to the collection station.

Multipurpose.

Cascata can be used to carry linen and garbage, avoiding elevator usage.

Smart.

Cascata is programmable for maintenance check and allows an electronic management of the alarms.

Linen chutes

Materials

AISI304 (or galvanized) stainless steel: thickness 1.2 mm.

Diameters: from 400 mm (16 ") to 900 mm (35").

 

Stainless still doors

with side opening, size according to the morphology of the chute, closing by pneumatic piston with key or electronic lock.

EI120/EI60 with 120/60 minutes fire resistance class, higher classes on request.

 

Discharge terminal

H-shaped; side-opening EI 120/EI 60 door, normally open with a 70°C thermal fuse for closure in the event of fire, or connectable to a BMS via a thermal-magnetic release.

​

Air vent

positioned beyond the roof level, through a flexible duct.

½ ”sprinkler near the door above the exhaust terminal.

Other materials and specifications on request.

Garbage chutes

Materials

AISI304 stainless steel (or galvanized):  thickness 1.2 mm (or 1.5 mm).

Diameters: from 400 mm (16 ") to 900 mm (35").

​

Stainless still doors

with side opening, size according to the morphology of the chute, closing with pneumatic piston with key or electronic closing.

EI120/EI60 with a fire resistance class of 120/60 minutes, higher classes on request.

​

Discharge terminal

H-shaped; side-opening EI 120/EI 60 door, normally open with a 70°C thermal fuse for closure in the event of fire, or connectable to a BMS via a thermal-magnetic release.

 

Air vent

positioned beyond the roof level, through a flexible duct.

½ ”sprinkler near the door above the exhaust terminal.

​

Other materials and specifications on request.

​

slide.png
basket.png
bottom of page