Standard Door
with key
Made of stainless steel AISI 304, with self closing stainless steel Hinges, and self latching quite door closing function. Door is provided with a compliant T type lever locking handle and key locking devices.
On demand, frames suitable for different types of wall and finishing.
Smart Interlock Door
with controller
It allows the opening of one door at a time, for an upper level health and safety. Besides, electronic system locks off the doors when cleaning procedure are activated. It can be installed in every type of construction, either for linen and garbage chute.
Intake section
An intake section is installed at each served floor and connected to each door. The standard length of this section is 1200 mm but different dimensions can be made for tailored applications. Each intake section can hold a fire sprinkler.
Straight Section
Duct made of stainless steel AISI 304 1,2 mm thickness Other materials on demand.
Standard lengths: 450mm, 575mm, 950mm, 1200mm.
Standard diameters: 600mm, 800mm.
Other dimensions on demand.
H shaped hopper
At the base of the chute, an H shaped hopper should be installed. It is equipped with an automatic fire cut-off door to prevent the spread of fire. In absence of fire, the top hinged door is held open with a thermal fusible link sets at 71°C.
Gravity fire cut-off damper
Alternatively to the fire cut-off door it is possible to install an automatic gravity fire cut-off damper which slides on rails.
It works by a thermal fusible link sets at 71°C.
Floor support
Made of stainless steel or galvanized steel.
The support can hold, as an option, anti-vibration supports.
Wherever installed the supports shall be bolted to concrete slabs or load bearing walls.
Vent and Chute end cup
To be placed above the roof level in presence of a fan. It consists in a flexible duct equipped with a rain cap. It is positioned over the chute end cap.
The chute end cup has a predisposition for fan and disinfecting and sanitizing unit too.